Mini 2007 Cooper Manuel d'utilisateur télécharger pdf (Page 109)

Reference At a glanceControlsDriving tipsMobility

107

6 Wrench, screwdriver/Phillips screwdriver,

towing eyelet

7 Compressor, hose with manometer and plug

for cigarette lighter socket

8 Package with filling hose, valve remover and

valve core

Use of the MINI Mobility System may be

ineffective if the tire puncture measures

approx. 1/8 in/4 mm or more. Contact the near-

est MINI Dealer if the tire cannot be made driv-

able with the MINI Mobility System.<

Liquid sealant

1 Filling hose

2 Filling canister

Filling

1. Shake the filling canister.

2. Screw the filling hose onto the filling canis-

ter.

3. Unscrew the dust cap from the valve of the

defective tire.

4. Screw out the valve core with the valve

remover. The valve remover is located in a

package with the filling hose.

5. Remove the cap from the filling hose.

6. Push the filling hose onto the tire valve.

7. Hold the filling canister with the cap down

and squeeze.

8. Squeeze the entire contents of the canister

into the tire.

9. Remove the filling hose.

10. Screw the valve core into the tire valve with

the valve remover.

In the event of a lost or dirty valve core

you will find another valve core in the

package with the filling hose.

Remember that the liquid canister must be

replaced every four years if the equipment has

not been used.<

Compressor

1 Hose with manometer

2 Compressor

3 Connector for power supply

Reinflating the tire

1. Screw hose 1 with manometer onto the tire

valve.

2. Insert connector 3 into the lighter socket in

the interior of the vehicle, page 72.

3. Switch on compressor 2.

4. Inflate the tire to at least 26.1 psi/1.8 bar but

to no more than 36.2 psi/2.5 bar.

To check the air pressure, shut off the device

for a short time.

Do not run the compressor for longer

than 6 minutes, otherwise the device

will overheat and possibly be damaged.<

If a pressure of 26.1 psi/1.8 bar is not reached:

1. Unscrew hose 1 and drive the vehicle for-

ward and backward about 30 ft/10 m to dis-

tribute the liquid sealant in the tires evenly.

2. Repeat the procedure.

If a pressure of 26.1 psi/1.8 bar is still not

reached, the tire is too badly damaged.

Please contact the nearest MINI Dealer.<

Online Edition for Part no. 01 41 0 013 069 - © 11/06 BMW AG

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 147 148

Commentaires sur ces manuels

Pas de commentaire