Mini 2011 Countryman Manuel d'utilisateur télécharger pdf (Page 133)

131

AT A GLANCEReference Mobility ControlsDriving tipsCommunications

Replacing components

Wiper blades

Changing the front wiper blades

1. Fold out the wiper arm and hold it.

2. Press together the locking spring, arrows 1,

and fold out the wiper blade, arrow 2.

3. Pull the wiper blade forward and out of the

catch mechanism.

4. Press the new wiper blade into the fixture

until it engages audibly.

To avoid damage, make sure that the

wiper arms are against the windshield

before you open the hood.<

Changing the rear wiper blade

1. Fold out the wiper arm and hold it.

2. Rotate the wiper blade toward the back as

far as it will go, arrow.

3. Press the wiper blade against the limit and

thus out of the mounting.

4. Press the new wiper blade into the fixture

until it engages audibly.

Lamps and bulbs

Lamps and bulbs make an essential contribution

to vehicle safety. They should, therefore, be

handled carefully. The manufacturer of your

MINI recommends having your MINI dealer per-

form any work that you do not feel competent to

perform yourself or that is not described here.

Never touch the glass of new bulbs with

your bare fingers, as even minute

amounts of contamination will burn into the

bulb's surface and reduce its service life. Use a

clean tissue, cloth or something similar, or hold

the bulb by its base.<

You can obtain a selection of replacement bulbs

at your MINI dealer.

When working on electrical systems,

always begin by switching off the con-

sumer in question; otherwise, short circuits

could result. To avoid possible injury or equip-

ment damage when replacing bulbs, observe

any instructions provided by the bulb manufac-

turer.<

Caring for headlamps, refer to page 128.

For any bulb replacement not described

below, contact a MINI dealer or a work-

shop that has specially trained personnel work-

ing in accordance with the specifications of the

MINI manufacturer.<

For checking and adjusting headlamp aim,

please contact your MINI dealer.<

Light-emitting diodes LEDs

Light-emitting diodes installed behind translu-

cent lenses serve as the light sources for many of

the controls and displays in your vehicle. These

light-emitting diodes are related to conven-

tional laser diodes, and legislation defines them

as Class 1 light-emitting diodes.

Do not remove the covers or expose the

eyes directly to the unfiltered light source

for several hours; otherwise, this could cause

irritation of the retina.<

1 2 ... 128 129 130 131 132 133 134 135 136 137 138 ... 175 176

Commentaires sur ces manuels

Pas de commentaire

Mini 2011 Countryman Manuel d'utilisateur Page 133

Commentaires sur ces manuels

Produits connexes et manuels pour Voitures Mini 2011 Countryman