Mini R53 Manuel d'utilisateur télécharger pdf (Page 8)

8© BMW AG, München 01 29 0 397 166 10.2004

3. Installation

Connect (by twisting) yellow wire (1) to

the one end (2) of the white/red wire.

Connect white/red wire from connector and

twisted wire with crimping pliers and crimp

connector E. Make sure that the wires are

connected correctly. Reconnect if necessary.

Fit heat shield D under crimp connector E to

protect the plug and wires.

Use hot air blower to heat up crimp connector E

until the adhesive it contains is released and

the heat-shrinkable sleeve is firmly secured.

Fit connector housing (1) in position.

The John Cooper Works software must be

loaded before installing the engine control

unit.

Make sure that the yellow wire (2) is not

damaged.



Reinstall seal on partition B.

2

1

050 0546 V

D

E

050 0547 V

1

2

X60004

050 0548 V

1 2 3 4 5 6 7 8 9 10 11 12

Commentaires sur ces manuels

Pas de commentaire